Download REINER SCT cyberJack pinpad/e-com USB for Windows to smartCardReader driver. (packages for TCO are remade DEB packages - just for info) But I have problems with Smartcard reader from REINER SCT - Cyberjack e-com plus which does not simply work even with its own drivers, that are provided on web-site. I was trying older rdesktop aswell as the new one I have made, same for pcsc-lite including latest drivers from Reiner. However rebasing to 1.6.x is treated as somehow problematic. Version-Release number of selected component (if applicable): pcsc-lite-1.5.2-13.el64 Actual results: Missing support for Reiner SCT cyberJack® RFID standard card reader Expected results: Fully working card reader Reiner SCT cyberJack® RFID standard.

Introduction¶

The USB serial driver currently supports a number of different USB toserial converter products, as well as some devices that use a serialinterface from userspace to talk to the device.

See the individual product section below for specific information aboutthe different devices.

Configuration¶

Currently the driver can handle up to 256 different serial interfaces atone time.

The major number that the driver uses is 188 so to use the driver,create the following nodes:

When the device is connected and recognized by the driver, the driverwill print to the system log, which node(s) the device has been boundto.

Specific Devices Supported¶

ConnectTech WhiteHEAT 4 port converter¶

ConnectTech has been very forthcoming with information about theirdevice, including providing a unit to test with.

The driver is officially supported by Connect Tech Inc.http://www.connecttech.com

For any questions or problems with this driver, please contactConnect Tech’s Support Department at support@connecttech.com

HandSpring Visor, Palm USB, and Clié USB driver¶

This driver works with all HandSpring USB, Palm USB, and Sony Clié USBdevices.

Only when the device tries to connect to the host, will the device showup to the host as a valid USB device. When this happens, the device isproperly enumerated, assigned a port, and then communication _should_ bepossible. The driver cleans up properly when the device is removed, orthe connection is canceled on the device.

NOTE:

This means that in order to talk to the device, the sync button must bepressed BEFORE trying to get any program to communicate to the device.This goes against the current documentation for pilot-xfer and otherpackages, but is the only way that it will work due to the hardwarein the device.

When the device is connected, try talking to it on the second port(this is usually /dev/ttyUSB1 if you do not have any other usb-serialdevices in the system.) The system log should tell you which port isthe port to use for the HotSync transfer. The “Generic” port can be usedfor other device communication, such as a PPP link.

For some Sony Clié devices, /dev/ttyUSB0 must be used to talk to thedevice. This is true for all OS version 3.5 devices, and most devicesthat have had a flash upgrade to a newer version of the OS. See thekernel system log for information on which is the correct port to use.

If after pressing the sync button, nothing shows up in the system log,try resetting the device, first a hot reset, and then a cold reset ifnecessary. Some devices need this before they can talk to the USB portproperly.

Devices that are not compiled into the kernel can be specified with moduleparameters. e.g. modprobe visor vendor=0x54c product=0x66

There is a webpage and mailing lists for this portion of the driver at:http://sourceforge.net/projects/usbvisor/

For any questions or problems with this driver, please contact GregKroah-Hartman at greg@kroah.com

PocketPC PDA Driver¶

This driver can be used to connect to Compaq iPAQ, HP Jornada, Casio EM500and other PDAs running Windows CE 3.0 or PocketPC 2002 using a USBcable/cradle.Most devices supported by ActiveSync are supported out of the box.For others, please use module parameters to specify the product and vendorid. e.g. modprobe ipaq vendor=0x3f0 product=0x1125

The driver presents a serial interface (usually on /dev/ttyUSB0) overwhich one may run ppp and establish a TCP/IP link to the PDA. Once thisis done, you can transfer files, backup, download email etc. The mostsignificant advantage of using USB is speed - I can get 73 to 113kbytes/sec for download/upload to my iPAQ.

This driver is only one of a set of components required to utilizethe USB connection. Please visit http://synce.sourceforge.net whichcontains the necessary packages and a simple step-by-step howto.

Once connected, you can use Win CE programs like ftpView, Pocket Outlookfrom the PDA and xcerdisp, synce utilities from the Linux side.

To use Pocket IE, follow the instructions given athttp://www.tekguru.co.uk/EM500/usbtonet.htm to achieve the same thingon Win98. Omit the proxy server part; Linux is quite capable of forwardingpackets unlike Win98. Another modification is required at least for theiPAQ - disable autosync by going to the Start/Settings/Connections menuand unchecking the “Automatically synchronize …” box. Go toStart/Programs/Connections, connect the cable and select “usbdial” (orwhatever you named your new USB connection). You should finally windup with a “Connected to usbdial” window with status shown as connected.Now start up PIE and browse away.

If it doesn’t work for some reason, load both the usbserial and ipaq modulewith the module parameter “debug” set to 1 and examine the system log.You can also try soft-resetting your PDA before attempting a connection.

Other functionality may be possible depending on your PDA. According toWes Cilldhaire <billybobjoehenrybob@hotmail.com>, with the Toshiba E570,…if you boot into the bootloader (hold down the power when hitting thereset button, continuing to hold onto the power until the bootloader screenis displayed), then put it in the cradle with the ipaq driver loaded, opena terminal on /dev/ttyUSB0, it gives you a “USB Reflash” terminal, which canbe used to flash the ROM, as well as the microP code.. so much for needingToshiba’s $350 serial cable for flashing!! :DNOTE: This has NOT been tested. Use at your own risk.

For any questions or problems with the driver, please contact GaneshVaradarajan <ganesh@veritas.com>

Keyspan PDA Serial Adapter¶

Single port DB-9 serial adapter, pushed as a PDA adapter for iMacs (mostlysold in Macintosh catalogs, comes in a translucent white/green dongle).Fairly simple device. Firmware is homebrew.This driver also works for the Xircom/Entrega single port serial adapter.

Current status:

• basic input/output (tested with ‘cu’)
• blocking write when serial line can’t keep up
• changing baud rates (up to 115200)
• getting/setting modem control pins (TIOCM{GET,SET,BIS,BIC})
• sending break (although duration looks suspect)

• device strings (as logged by kernel) have trailing binary garbage
• device ID isn’t right, might collide with other Keyspan products
• changing baud rates ought to flush tx/rx to avoid mangled half characters

• parity, 7 vs 8 bits per char, 1 or 2 stop bits
• HW flow control
• not all of the standard USB descriptors are handled:Get_Status, Set_Feature, O_NONBLOCK, select()

For any questions or problems with this driver, please contact BrianWarner at warner@lothar.com

Keyspan USA-series Serial Adapters¶

Single, Dual and Quad port adapters - driver uses Keyspan suppliedfirmware and is being developed with their support.

Current status:

The USA-18X, USA-28X, USA-19, USA-19W and USA-49W are supported andhave been pretty thoroughly tested at various baud rates with 8-N-1character settings. Other character lengths and parity setups arepresently untested.

The USA-28 isn’t yet supported though doing so should be prettystraightforward. Contact the maintainer if you require thisfunctionality.

More information is available at:

For any questions or problems with this driver, please contact HughBlemings at hugh@misc.nu

FTDI Single Port Serial Driver¶

This is a single port DB-25 serial adapter.

Devices supported include:

• TripNav TN-200 USB GPS
• Navis Engineering Bureau CH-4711 USB GPS

For any questions or problems with this driver, please contact Bill Ryder.

ZyXEL omni.net lcd plus ISDN TA¶

Cypress M8 CY4601 Family Serial Driver¶

This driver was in most part developed by Neil “koyama” Whelchel. Ithas been improved since that previous form to support dynamic serialline settings and improved line handling. The driver is for the mostpart stable and has been tested on an smp machine. (dual p2)

Chipsets supported under CY4601 family:

Devices supported:

• DeLorme’s USB Earthmate GPS (SiRF Star II lp arch)
• Cypress HID->COM RS232 adapter

Note:

Cypress Semiconductor claims no affiliation with thehid->com device.

Most devices using chipsets under the CY4601 family shouldwork with the driver. As long as they stay true to the CY4601usbserial specification.

Technical notes:

The Earthmate starts out at 4800 8N1 by default… the driver willupon start init to this setting. usbserial core provides the restof the termios settings, along with some custom termios so that theoutput is in proper format and parsable.

The device can be put into sirf mode by issuing NMEA command:

As far as I can tell it supports pretty much every sirf command asdocumented online available with firmware 2.31, with some unknownmessage ids.

The hid->com adapter can run at a maximum baud of 115200bps. Please notethat the device has trouble or is incapable of raising line voltage properly.It will be fine with null modem links, as long as you do not try to link twotogether without hacking the adapter to set the line high.

The driver is smp safe. Performance with the driver is rather low when usingit for transferring files. This is being worked on, but I would be willing toaccept patches. An urb queue or packet buffer would likely fit the bill here.

If you have any questions, problems, patches, feature requests, etc. you cancontact me here via email:

(your problems/patches can alternately be submitted to usb-devel)

Digi AccelePort Driver¶

This driver supports the Digi AccelePort USB 2 and 4 devices, 2 port(plus a parallel port) and 4 port USB serial converters. The driverdoes NOT yet support the Digi AccelePort USB 8.

This driver works under SMP with the usb-uhci driver. It does notwork under SMP with the uhci driver.

The driver is generally working, though we still have a few more ioctlsto implement and final testing and debugging to do. The parallel porton the USB 2 is supported as a serial to parallel converter; in otherwords, it appears as another USB serial port on Linux, even thoughphysically it is really a parallel port. The Digi Acceleport USB 8is not yet supported.

Please contact Peter Berger (pberger@brimson.com) or Al Borchers(alborchers@steinerpoint.com) for questions or problems with thisdriver.

Belkin USB Serial Adapter F5U103¶

Single port DB-9/PS-2 serial adapter from Belkin with firmware by eTEK Labs.The Peracom single port serial adapter also works with this driver, aswell as the GoHubs adapter.

Current status:

The following have been tested and work:

• Baud rate 300-230400
• Data bits 5-8
• Stop bits 1-2
• Parity N,E,O,M,S
• Handshake None, Software (XON/XOFF), Hardware (CTSRTS,CTSDTR) [1]
• Break Set and clear
• Line control Input/Output query and control [2]

• Add true modem control line query capability. Currently tracks thestates reported by the interrupt and the states requested.
• Add error reporting back to application for UART error conditions.
• Add support for flush ioctls.
• Add everything else that is missing :)

For any questions or problems with this driver, please contact WilliamGreathouse at wgreathouse@smva.com

Empeg empeg-car Mark I/II Driver¶

This is an experimental driver to provide connectivity support for theclient synchronization tools for an Empeg empeg-car mp3 player.

• Don’t forget to create the device nodes for ttyUSB{0,1,2,…}
• modprobe empeg (modprobe is your friend)
• emptool –usb /dev/ttyUSB0 (or whatever you named your device node)

For any questions or problems with this driver, please contact GaryBrubaker at xavyer@ix.netcom.com

MCT USB Single Port Serial Adapter U232¶

This driver is for the MCT USB-RS232 Converter (25 pin, Model No.U232-P25) from Magic Control Technology Corp. (there is also a 9 pinModel No. U232-P9). More information about this device can be found atthe manufacturer’s web-site: http://www.mct.com.tw.

The driver is generally working, though it still needs some more testing.It is derived from the Belkin USB Serial Adapter F5U103 driver and itsTODO list is valid for this driver as well.

This driver has also been found to work for other products, which havethe same Vendor ID but different Product IDs. Sitecom’s U232-P25 serialconverter uses Product ID 0x230 and Vendor ID 0x711 and works with thisdriver. Also, D-Link’s DU-H3SP USB BAY also works with this driver.

For any questions or problems with this driver, please contact WolfgangGrandegger at wolfgang@ces.ch

Inside Out Networks Edgeport Driver¶

This driver supports all devices made by Inside Out Networks, specificallythe following models:

• Edgeport/4
• Rapidport/4
• Edgeport/4t
• Edgeport/2
• Edgeport/4i
• Edgeport/2i
• Edgeport/421
• Edgeport/21
• Edgeport/8
• Edgeport/8 Dual
• Edgeport/2D8
• Edgeport/4D8
• Edgeport/8i
• Edgeport/2 DIN
• Edgeport/4 DIN
• Edgeport/16 Dual

For any questions or problems with this driver, please contact GregKroah-Hartman at greg@kroah.com

REINER SCT cyberJack pinpad/e-com USB chipcard reader¶

Interface to ISO 7816 compatible contactbased chipcards, e.g. GSM SIMs.

Current status:

For any questions or problems with this driver, please contactlinux-usb@sii.li

Prolific PL2303 Driver¶

This driver supports any device that has the PL2303 chip from Prolificin it. This includes a number of single port USB to serial converters,more than 70% of USB GPS devices (in 2010), and some USB UPSes. Devicesfrom Aten (the UC-232) and IO-Data work with this driver, as doesthe DCU-11 mobile-phone cable.

For any questions or problems with this driver, please contact GregKroah-Hartman at greg@kroah.com

KL5KUSB105 chipset / PalmConnect USB single-port adapter¶

Current status:

The driver was put together by looking at the usb bus transactionsdone by Palm’s driver under Windows, so a lot of functionality isstill missing. Notably, serial ioctls are sometimes faked or not yetimplemented. Support for finding out about DSR and CTS line status ishowever implemented (though not nicely), so your favorite autopilot(1)and pilot-manager -daemon calls will work. Baud rates up to 115200are supported, but handshaking (software or hardware) is not, which iswhy it is wise to cut down on the rate used is wise for largetransfers until this is settled.

See http://www.uuhaus.de/linux/palmconnect.html for up-to-dateinformation on this driver.

Winchiphead CH341 Driver¶

This driver is for the Winchiphead CH341 USB-RS232 Converter. This chipalso implements an IEEE 1284 parallel port, I2C and SPI, but that is notsupported by the driver. The protocol was analyzed from the behaviourof the Windows driver, no datasheet is available at present.

The manufacturer’s website: http://www.winchiphead.com/.

For any questions or problems with this driver, please contactfrank@kingswood-consulting.co.uk.

Moschip MCS7720, MCS7715 driver¶

These chips are present in devices sold by various manufacturers, such as Sybaand Cables Unlimited. There may be others. The 7720 provides two serialports, and the 7715 provides one serial and one standard PC parallel port.Support for the 7715’s parallel port is enabled by a separate option, whichwill not appear unless parallel port support is first enabled at the top-levelof the Device Drivers config menu. Currently only compatibility mode issupported on the parallel port (no ECP/EPP).

• Implement ECP/EPP modes for the parallel port.
• Baud rates higher than 115200 are currently broken.
• Devices with a single serial port based on the Moschip MCS7703 may workwith this driver with a simple addition to the usb_device_id table. Idon’t have one of these devices, so I can’t say for sure.

Generic Serial driver¶

If your device is not one of the above listed devices, compatible withthe above models, you can try out the “generic” interface. Thisinterface does not provide any type of control messages sent to thedevice, and does not support any kind of device flow control. All thatis required of your device is that it has at least one bulk in endpoint,or one bulk out endpoint.

To enable the generic driver to recognize your device, provide:

where the <vid> and <pid> is replaced with the hex representation of yourdevice’s vendor id and product id.If the driver is compiled as a module you can also provide one id whenloading the module:

This driver has been successfully used to connect to the NetChip USBdevelopment board, providing a way to develop USB firmware withouthaving to write a custom driver.

For any questions or problems with this driver, please contact GregKroah-Hartman at greg@kroah.com

Contact¶

Greg Kroah-Hartmangreg@kroah.com

From DD-WRT Wiki

Download Reiner Sct Others Driver Installer

另见：USB存储 及 USB打印机共享

[edit] 带USB接口的设备

在 支持的设备列表内， 仅有少许带USB接口的设备。如下所列：
leangjia注：自行加装USB口的机器也不少。如本人的WRT54G V4即为改装过的机器，配置为，CPU200MHz，内存64M，刷的固件是dd-wrt.v24_mega_generic.bin【7.34MB】已经带USB驱动在固件内。

ASUS WL-500g Premium V.1 (German) 与 ASUS WL-500g Premium V.2

Asus WL-520GU 及同系列的各设备

Linksys WRT610N Versions 1 和 2

dd-wrt的某些版本已自带USB驱动支持，通过web-GUI界面即可开户。 dd-wrt 所有版本均可通过安装USB所需kernel modules启用JFFS，然后利用开机启动指令来挂载USB存储设备。见USB存储 说明文字与示例指令。

带USB接口的网络路由器设备Asus WL-520gU 成本$45以上 (截止2009年9月23日)。 depending on capability, but the ability to add external hardware easily makes these far more powerful units.

[edit] USB设备

The various USB options include:

Download Reiner Sct Others Driver Updater

• Network-attached storage including flash memories, hard discs, floppy discs and CD/DVD-ROM devices. These can be shared across a LAN using Samba; an external hard drive also provides plentiful swap space for use as virtual memory.
• Printer Sharing; as either a pass-through driver ([p910nd] - for printers not supported directly by embedded Linux or those needing proprietary manufacturers' drivers) or CUPS (for fully Linux-supported printers only)
• CD recording; the Optware packages provide cdrtools: common low-level CD recording tools such as cdrecord and mkisofs.
• Local network sharing of supported scanner models using SANE drivers; these may be accessed from Linux desktop PC's or (through third-party utilities like SaneTwain) even from Windows PC's.
• Cellular Phone/USB Modem as WAN connection for acm.o driver compartible USB devices

The availability of external storage and peripherals makes a greater number of packages, including audio and multimedia, potentially usable from these otherwise-tiny devices.

[edit] 多媒体

There are a number of Optware packages designed to handle audio or to convert multimedia data from one format to another. USB audio hardware is becoming more commonplace due to its use with Voice over IP softphone applications, and the 'video 4 linux' project has done much toward making analogue video capture and webcam devices operate with the Linux desktop. It would appear that, once USB support is available, many packages are available to be tested on the embedded Linux platform.

Getting video back out, however, is no easy task.

One device which may be of interest is a USB hard drive enclosure with a built-in media player, such as the Mediasonic HM2-U2TV or others like it. Install a laptop HDD into this tiny device, connect it to your USB-aware router as network-attached storage and load it with images, audio and video files. Unplug it and connect it to your PAL or NTSC TV monitor as a self-contained media playback device. Note that the media player is deactivated whenever the USB interface is connected.

Another possible combination: a Dreambox DM500 (dream-multimedia-tv.de) and a NAS-capable Linux router on the same network. The DM500's are Linux-based digital TV units (they do not tune analogue signals). Having no built-in USB or storage, these depend on network-attached storage elsewhere on the LAN in order to provide PVR-like capabilities. Pair these with a Linux-based router such as the Asus WL-700GE (which has a built-in 160GB HDD) or any of the USB-capable devices (which interface to USB hard drives) and video can be stored and displayed without relying on access to desktop PC's and without going to the higher-end Dreambox DM7000 series (which offers built-in HDD, USB, keyboard and flash memory support, but at double the price - a hefty premium to pay).

[edit] 多媒体设备

Download Reiner Sct Others Drivers

Multifunction printers (a printer and scanner in one unit, resembling a small photocopier) may be supported, depending on model. These may be treated as the individual portions - a printer and a scanner - although even an otherwise-incompatible device will normally allow just the printer portion to be used on a strictly pass-through basis through p910d even if none of the other capabilities are supported.

USB telephone-style handsets may or may not be Linux-compatible, with low-end models being more likely to be recognised as some Linux-compatible combination (typically a standard USB sound card with perhaps a USB human interface device as the keypad). Higher-end devices often are locked to one provider by being tightly-integrated to Windows-specific drivers and/or the Skype softphone application, rendering them useless. For instance, the Linksys CIT200 is useless outside Windows, while the far lower-end Skype SK04 is a relatively-standard USB device which may be worth testing in a Linux environment.

Laptop 'USB docking stations' typically provide some combination of a USB hub, an extra network interface, audio, serial/parallel ports, keyboard and mouse. Their compatibility varies depending on model; it may be necessary to determine which drivers are installed by manufacturer-supplied Windows discs for each of the individual peripherals in these bundled units and check availability of corresponding existing embedded Linux drivers before considering these for use. Some may work, some most certainly don't. Unfortunately, USB to SVGA interfaces in these packages are currently very proprietary and in no way Linux compatible - the one key stumbling block preventing a USB-aware network-storage device such as Linksys' NSLU2 or a USB-aware router from being expanded to be a small but complete self-contained embedded Linux computer system.

[edit] USB驱动

These drivers may be installed to JFFS using ipkg and then loaded (using insmod) from a startup script to enable USB support.

As of dd-wrt v.24-final the Mega version has built-in USB support.

In the web-GUI select: tab: Services -> tab: Services --> section: USB Support

For v.24 versions with built-in USB support, using ipkg will retrieve the ipkg files from the default Openwrt WhiteRussian feed. These drivers may not work correctly with v24 which uses a more recent version of the Linux 2.4 kernel. An alternative is to see the forum post here. An archive is attached in the first post that contains some file system, usb, and usb serial drivers not included in the usb enabled versions of DD-WRT. These drivers need to be copied to JFFS or a USB存储 device and loaded (using insmod) from a startup script to enable these devices.

文件系统：

USB延长：

USB To 串口：

For other versions of DD-WRT load the following modules:

USB核心驱动：

存储：

Also read USB存储 for more on USB Storage. As of dd-wrt v.24-final the Mega version has built-in USB storage support.

串口：

音频：

See http://sokrates.mimuw.edu.pl/~sebek/openwrt/ - some drivers exist but these are not part of the base 2.4.x distribution. Proper sound-core and kmod-usb-audio support is provided once the newer 2.6 kernel is used. While some OpenWrt versions are beginning to support 2.6 kernels, as of Oct'97 Broadcom wireless still isn't working with the newer kernel.

打印机和多功能：Also see USB_printer_sharing for more on USB printer support. As of dd-wrt v.24-final the Mega version has built-in USB printer support.

蓝牙：

USB猫：

• One example here USB Modem as WAN connection
• General listing as of 04/04/09 .v24 SP2: 3G / 3.5G about 3G/3.5G UMTS/HSDPA/HSUPA/CDMA2000(EVO)

'扩展链接：'macbook slow