Marantz USB Devices Driver Download

Posted on  by



NI Device Drivers provides popular NI instrument drivers you can use to control NI and third-party hardware. NI Device Drivers is a bundle that features most NI instrument drivers, including NI-DAQmx, NI-VISA, NI-SCOPE, and NI-SWITCH. Please be warned that counterfeit (fake) PL-2303HX (Chip Rev A) USB to Serial Controller ICs using Prolific's trademark logo, brandname, and device drivers, were being sold in the China market. Counterfeit IC products show exactly the same outside chip markings but generally are of poor quality and causes Windows driver compatibility issues.

Marantz usb devices driver downloads

You can enjoy high-quality audio playback from the D/A converter built in to this unit by inputting music files into this unit from a computer via USB connection.

Before USB connecting this unit to your computer, install the driver software in your computer.

Also, you can use whichever commercially available or downloadable player software you like to playback files on your computer.

OS

Mac OS X 10.6.3 or later

USB 2.0: USB High speed/USB Audio Class Ver.2.0

Microsoft, Windows Vista, Windows 7 and Windows 8 are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.

Apple, Macintosh and Mac OS are trademarks of Apple Inc., registered in the U.S. and other countries.

Installing the driver software

Disconnect the USB cable between your PC and the unit.

Marantz Usb Devices Driver Downloads

The driver software cannot be installed correctly if your PC is connected to the unit by a USB cable.

If the unit and your computer are connected by a USB cable and the computer is switched on before installation, disconnect the USB and restart the computer.

Download the dedicated driver from the “Download” section of the PM7005 page of the Marantz website onto your PC.
Unzip the downloaded file, select the 32-bit or 64-bit exe file that matches your Windows operating system, and double-click the file.
Click “OK”.
The wizard menu is displayed. Click “Next”.
Read the Software Licensing Agreement, and click “I accept the terms in the license agreement”.

The installation starts. Do not perform any operation on the PC until the installation is completed.

In the Windows security dialog, select “Always trust software from “DandM Holdings Inc.””.
When the installation is completed, click “Finish”.
With the unit power off, connect the unit and PC using a USB cable (sold separately).

For details on connections, see Connecting a PC or Maclink.

When the unit power is turned on, the PC automatically finds and connects to the unit.

Press the input source select button (USB-DAC) to switch the input source to “USB-DAC”.
Click the “Start” button and click “Control Panel” on the PC.
Click the “Sound” icon.
Check that there is a checkmark next to “Default Device” under in “Digital Audio Interface” of the “Playback” tab.

When there is a checkmark for a different device, click “Marantz USB Audio” and “Set Default”.

Marantz USB Devices Driver Download

Outputs a TEST signal from the PC and checks the audio output from the USB-DAC function.

Select “Digital Audio Interface” and click “Properties”.

The Digital Audio Interface Properties window is displayed.

Click the “Advanced” tab.
Select the sampling rate and bit rate to be applied to the D/A converter.

It is recommended that “2 channel, 24 bit, 192000 Hz (Studio Quality)” is selected.

Click “Test”.

Check that audio from this unit is output from the PC.

The dedicated driver must be installed in the PC before this unit is connected to a PC. Operation will not occur correctly if connected to the PC before the dedicated driver has been installed.

Operation may fail in some PC hardware and software configurations.

Install the desired player software on your computer beforehand.

Use the rear panel USB-DAC port to connect this unit to a computer.

For the connection procedure, refer to the Connecting a PC or Maclink section.

Press the input source select button (USB-DAC) to switch the input source to “USB-DAC”.

The USB-DAC input indicator flashes if this unit cannot detect the sampling frequency of the input signal.

See D/A converterlink.

Perform operations such as playback and pause on the computer. At this time, you cannot perform operations with buttons on this unit or the remote control.

You can also control the volume and equalizer on the computer. Enjoy playing music at the desired volume.

Marantz Usb Devices Driver Download Windows 7

When this unit is functioning as a D/A converter, sound is not output from the computer’s speakers.

If the computer is disconnected from this unit while the computer music playback software is running, the playback software may freeze. Always exit the playback software before disconnecting the computer.

Marantz Usb Devices Driver Download Windows 10

When an error occurs on the computer, disconnect the USB cable and restart the computer.

Marantz Usb Devices Driver Download Cnet

Use a cable that is 3 m or less to connect to the computer.