We would like to turn your attention to one more device designed for secure user authentication on Windows and compatible with Rohos Logon Key. This is the RFID tag from the Swiss company Addimat.

1. Download Addimat Usb 2 Waiter Lock (serial) (com2) Drivers
2. Download Addimat Usb 2 Waiter Lock (serial) (com2) Driver Side Mirror
3. Download Addimat Usb 2 Waiter Lock (serial) (com2) Driver Windows 7

It was originally designed for identifying wait staff in pizzerias, restaurants, and cafés. It consists of an RFID reader with a round magnetic opening and a set of matching cylindrical keys. Each key has a rugged and waterproof body. Woven into the body of the key is an individual 48-byte serial number and a PIN code, which in some models can be reprogrammed.

Download Addimat Usb 2 Waiter Lock (serial) (com2) Drivers

Installing the driver

Addimat USB 2 Waiter Lock (serial) (COM2) CPN Tools mouse filter driver USB TEAC DVD-ROM DV28PUB USB Device Sony Ericsson Device 1039 USB WMC Device Management (COM6) Nokia 6275 USB Modem Intel(R) 82801CA/CAM USB universeller Hostcontroller - 2484. This banner text can have markup. Web; books; video; audio; software; images; Toggle navigation.

The reader can be produced with a Com or USB2 interface. To set up the reader with a COM interface, you do not need any special drivers. The computer will recognize the device on its own. To set up the reader with the USB2 interface, you must download the driver from the German site http://addimat.com.

You can also downlod the drivers from our site:

Unpack the archive and launch the installer. The program will install the drivers on the system. Connect the reader with the key to the computer. Then, open the control panel, go to System, and then choose Device Manager. The Addimat device will be shown with a question mark. Right-click on it and select the command for updating the driver. Set the driver installation process to search automatically. The program should then find the driver on the computer. Unfortunately, at the time of writing, a driver has not been released for Windows 8. We hope that when you finally read these lines, such a driver will be available.

Configuring the Rohos Logon Key program

Now you can launch Rohos Logon Key and configure its options. In the list of devices, choose RFID Readers. Easyident/Addimat. Click on Options. Choose Com3 and click OK. Open the Options again. Alongside the list of COM ports, there should be a notification that the tag has been detected. If this is not the case, choose another port.

The rest of the procedure for creating a key does not differ from using an ordinary USB Flash storage device.

When entering the system, insert the Addimat cylindrical key in the magnetic opening on the reader. Authentication will be fast and hassle-free. When you remove the key, after a few seconds the computer will either be locked or you will be logged out of the system, depending on what you choose in the settings. The key itself is small in size and cylindrical in shape, which makes it convenient to carry around in one’s pockets and find by touch.

We would like to thank the Addimat company for providing us with their devices and information on how to implement them.

Windows 7 64-bit & 32-bit, Windows Vista 64-bit & 32-bit, Windows XP, Windows 2000, Windows Me, Windows 98

Important note regarding Windows 7 and Vista:
The driver MUST be installed 'as Administrator'
Right-click the downloaded EXE file and choose Run as administrator

Download the Windows installer for the USB RS-232 adaptor:
Download for Windows 7/Vista/XP (32-bit)
Download for Windows 7/Vista (32-bit and 64-bit)

If for some reason the above driver does not work, try one of the following:
Download for Windows 7/Vista/XP (32-bit and 64-bit - Alternate driver)
Download for Windows XP, 2000, 98/ME (32-bit only)

For older cables (purchased prior to October, 2010):
Download for Windows 7/Vista/XP (32-bit and 64-bit)
Download for Windows Vista (32-bit only)

Run the installer, then after rebooting, plug the USB end of the adapter into one of the USB ports on the computer.

NOTE: For Windows 7, please use RC build 7100 or RTM Final version. (Installer program will not run on early Windows 7 or Beta versions)

Check the software driver installation

1) Open the Device Manager dialog from Control Panel

• Windows Vista: Start >> Control Panel >> System >> Hardware >> Device Manager
• Windows XP: Start >> Control Panel >> System >> Hardware >> Device Manager
• Windows 2000: Start >> Settings >> Control Panel >> System >> Hardware >> Device Manager
• Windows 98/ME: Start >> Settings >> Control Panel >> System >> Device Manager
  

2) Click the plus sign (+) next to 'Ports'.

3) If the device is properly installed, 'Serialio.com USB Serial Port' or 'Prolific USB-to-Serial COM Port' will be displayed.

The software driver is properly installed, but the USB-RS232 adaptor does not work as expected

One of the common reasons that software may not work as expected with a USB-Serial adaptor when the devcie is properly installed, is many older programs (and even some new ones) only support a limited number of COM ports (e.g. only COM1 - COM4)

If the USB-RS232 adapter is installed as COM5, it may need to be reassigned to COM1 - COM4 to work with some software.

The following outlines how to to reassign the COM port on Windows XP/2K/Me/98SE

Windows XP

1) Follow steps 1-3 of 'Check the software driver installation'above.

2) Right-click on the 'Prolific USB to Serial Port', then click Properties

3) Click on the 'Port Settings' tab. Click the 'Advanced' button.

4) In the 'COM Port Number' drop-down select the desired port number. For example if the software requires COM2, select COM2. Note the COM port must have '(in use)' listed next to it, if it does then another device with that name is already installed in the system. After selecting the desire port number, click 'OK.'

5) Click 'OK' again, and the device will show up as being on the same COM port that it was before (i.e., COM5), but should show up on the selected port name when the Device Manager dialog is closed and opened again.

6) Close the Device Manager. Launch the software to use with the new COM port.

Windows 2000, Me, and 98 SE (Second Edition)

Download Addimat Usb 2 Waiter Lock (serial) (com2) Driver Side Mirror

1) Follow steps 1 2 of 'Check the software driver installation'above.

2) Right-click on the 'Prolific USB to Serial Port', then click Properties.

3) Click on the 'Port Settings' tab. Click the 'Advanced' button.

4) Uncheck 'Use automatic settings'.

5) Select 'Input/Output range'. Click on 'Change Settings'.

6) Type '02E8-02EF' in the Value box. This value will change the port to COM 4. If COM 4 is in use, you must choose another port. The values for each port are.

• COM 1: 03F8-03FF
• COM 2: 02F8-02FF
• COM 3: 03E8-03EF
• COM 4: 02E8-02EF

7) Enter the value, then click OK. Click OK again, then click Yes when the 'Creating a Forced Configuration' window appears. Click OK.

8) Restart the computer. The Device Manager can be checked, to see the COM port change.

Download Addimat Usb 2 Waiter Lock (serial) (com2) Driver Windows 7

Note: Adaptor may not be exactly as pictured above.
back